Carl Stahl Nordgreif GmbH Nordgreif LOAD SUSPENSION EQUIPMENT
German English France Spain Russian Federation China
   • HOME  • NEWS AND EVENTS  • ABOUT US  • JOB OPPORTUNITIES  • CONTACT  • IMPRINT  • TERMS / CONDITIONS
LOAD SUSPENSION EQUIPMENT
Lifting Clamps
Beam Clamps
Lifting Beams
Tongs / Grabs / Clamps
Fork Lifts
Coil Hooks / C-Hooks
Spreader Beams
Wire Coil Inner Tongs
Wire Coil Outside Tongs
 
NORDGREIF SERVICE
 
 
NEWS / BOOKMARK

Tongs / Grabs / Clamps


drum tongs, drum collars, log tongs, cardboard (carton) tongs, stock box tongs, stock box rotating tongs, round profile tongs, rail tongs, turning tongs 

Z50 Round profile grab

Round profile grab for horizontal transport of rounded loads of all kinds; equipped with a self-actuating hold-open lever. All round profile grabs can also be supplied as shell grabs with protective coating for sensitive loads. All grabs are available with automatic step mechanism on request. We manufacture
all intermediate sizes, also with higher load capacity and different grab range.

Z50

Z50 Round profile grab
   

Z51 Rectangular profile clamp

The jaws of the rectangular profile clamps are provided with a wear-resistant protective coating.
They are suitable for transporting goods made of steel, concrete and wood. Surfaces have to be oil-free to ensure a safe grip. Please note that the minimum friction factor between load and pad must not be less than 0,75 μ. We welcome your special inquiry for use with oily grab loads. All rectangular profile clamps are equipped  with an open locking lever. We manufacture all intermediate sizes, also with higher load capacity and different grab range. In the case of oily or wet grab load, the jaws can be equipped with hardened pads.

Z51

Z51 Rectangular profile clamp
   

Z52 Grabs for Bales and Boxes

Grab for transporting compacted paper or fabric bales, boxes and timber planks. Simple, robust scissor construction with open locking device

Z52

Z52 Grabs for Bales and Boxes
   

Z54 Wire coil - internal grab

The wire coil internal grab is produced in two configurations: as a double-arm and a triple-arm version. Each grab is provided with an automatic positioning device. The grabs are suitable for internal grabbing of coiled, and wrapped wire coil rings. The grab tips are hardened and replaceable.
 

Z54 Wire coil - internal grab
   

Z56 / Z57 Container grabs - external or internal grabbing 

Container grabs for pick-up of warehouse stacking boxes: type Z56 external and type Z57 internal grabbing. The grab arms are pretensioned, to avoid opening when nudging or setting down. All grabs are provided with an open locking lever.

Z56

Z56 / Z57 Container grabs - external or internal grabbing
   

Z58 Turning grabs

This turning grab is suitable for aligning, turning or rotating of loads. It is a parallelogram grab, whose jaws open and close parallel to each other. The jaws allow 360° rotation and are  equipped with 90º lock-in for optimum adaptation to the grab load. This turning grab comes with an open locking lever.

Z58

Z58 Turning grabs
   

Z59 Drum grabs

Drum grab for standing steel drums. This is a simple, rigid grab for gripping under the drum rim. Version with open locking lever.

Z59

Z59 Drum grabs
   

Z60 Rail clamps

Rail clamp for transporting type S and UIC rails and crane rails. Especially rigid construction with open locking device, combined with locking latch to avoid opening of the grab when reducing pull or setting down.

Z60

Z60 Rail clamps
   

Z61 Grabs for cardboard boxes

Parallel grabs with extra large surface and narrow jaws with rubber coating, that allow even distribution of pressure. Particularly suitable for cardboard boxes stacked very closely to one another. This grab has an open locking device.

Z61

Z61 Grabs for cardboard boxes
   

Z62 Log clamps / wood clamps

Clamp with large grab range and low external dimensions for transporting logs. Starting with a load capacity of 2,500 kg, the grab tips are replaceable. Version with open locking device.

Z62

Z62 Log clamps / wood clamps

   

Z63 Drum grabs for horizontal positioned barrels

Grab for drums according to DIN 6643 and 6635, which has a low profile and automatic open locking lever.
 

Z63 Drum grabs for horizontal positioned barrels
   

Z64 Drum grabs for verticalor horizontal drums 

Drum grab for transporting vertical or horizontal drums in accordance with DIN 66 43 with rotating jaws and slewing stop as well as open locking lever. Grab range for single drum diameter; also suitable for turning full drums.

Z64

Z64 Drum grabs for verticalor horizontal drums
   

Z65 Grabs for stone blocks 

Adjustable grab with very large range. The requested grab range and centre of gravity can be quickly adjusted using plug bolts. Low profile, with open locking lever. The jaws are equipped with a protective coating.

Z65

Z65 Grabs for stone blocks

 

back to overview...

 

The Carl Stahl Company Group with 50 sites worldwide - your skilled partner.

Zertifizierter Schweißfachbetrieb GSI SLV
- top -
   
powered by © 2014 B & T
   
 
German German English English France France Spain Spain Russian Federation Russian Federation China China
Acrobat Reader
  © 2014 Carl Stahl Nordgreif GmbH
Last modified: 31.01.2013 00:22:09 Processing Time: 0.037